La Knowledge Base di Kurgan (2.0)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== wAP ac =====

Questa e` una configurazione di base per un wAP ac RBwAPG-5HacT2HnD (https://routerboard.com[[/RBw]]APG-5HacT2HnD) per fare da access point in bridge, con ip statico sulla lan e nessun firewall.
Ovviamente e` opportuno cambiare l' ip statico e il gateway, nonche` gli ssid e le chiavi di rete.

<code>
#
# Prima, eseguire un system reset-configuration no-defaults=yes
# poi collegarsi con il winbox (non ha ip) e caricare da console questa:
#
# mar/16/2017 15:28:46 by RouterOS 6.39rc55
# software id = HHUS-U4N3
#
/interface bridge
add fast-forward=no name=bridge1
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce country=italy disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=test wireless-protocol=802.11 wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=italy disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=test wireless-protocol=802.11 wps-mode=disabled
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=testicolo wpa2-pre-shared-key=testicolo
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=wlan2
add bridge=bridge1 interface=wlan1
/ip address
add address=10.1.42.199/24 interface=ether1 network=10.1.42.0
/ip dns
set servers=8.8.8.8
/ip route
add distance=1 gateway=10.1.42.1
/system clock
set time-zone-name=Europe/Rome
/system identity
set name=AccessPointTest
/system ntp client
set enabled=yes server-dns-names=pool.ntp.org
</code>

===== cAP AC =====

Questa e` la configurazione di un access point modello RouterBOARD cAP Gi-5acD2nD impostato come access point in bridge

<code>
# mar/14/2019 14:45:38 by RouterOS 6.44.1
# software id = 8ASH-TX7D
#
# model = RouterBOARD cAP Gi-5acD2nD
/interface bridge
add name=bridge1
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=2 band=2ghz-b/g/n country=italy disabled=no frequency=auto frequency-mode=regulatory-domain mode=ap-bridge ssid=test \
    wireless-protocol=802.11 wps-mode=disabled
set [ find default-name=wlan2 ] antenna-gain=3 band=5ghz-a/n/ac country=italy disabled=no frequency=auto frequency-mode=regulatory-domain mode=ap-bridge ssid=test \
    wireless-protocol=802.11 wps-mode=disabled
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
set [ find default-name=ether2 ] speed=100Mbps
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik wpa2-pre-shared-key=testicolo
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=wlan2
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=ether1
/interface list member
add interface=bridge1 list=LAN
/ip address
add address=172.16.2.3/24 interface=ether1 network=172.16.2.0
/ip dns
set servers=172.16.2.1
/ip route
add distance=1 gateway=172.16.2.1
/ip ssh
set allow-none-crypto=yes
/system clock
set time-zone-name=Europe/Rome
/system ntp client
set enabled=yes primary-ntp=172.16.2.1
</code>