La Knowledge Base di Kurgan (2.0)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== hAP AC2 =====

Condfigurazione di un Mikrotik hAP AC2 (https://mikrotik.com/product/hap_ac2) come access point puro con tutte le interfacce in bridge e ip statico.


<code>
# may/21/2019 16:26:47 by RouterOS 6.44.3
#
# model = RBD52G-5HacD2HnD
/interface bridge
add name=bridge1
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=3 band=2ghz-b/g/n channel-width=20/40mhz-Ce country=italy disabled=no frequency=auto \
    frequency-mode=regulatory-domain installation=indoor mode=ap-bridge ssid=wifi
set [ find default-name=wlan2 ] antenna-gain=3 band=5ghz-a/n/ac channel-width=20/40/80mhz-eeCe country=italy disabled=no frequency=auto \
    frequency-mode=regulatory-domain installation=indoor mode=ap-bridge ssid=wifi
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik wpa2-pre-shared-key=\
    passwordwpa
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=wlan2
/ip address
add address=192.168.0.52/24 interface=ether1 network=192.168.0.0
/ip dns
set servers=192.168.0.253
/ip route
add distance=1 gateway=192.168.0.253
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Rome
/system ntp client
set enabled=yes primary-ntp=192.168.0.253
</code>