wAP ac
Questa e` una configurazione di base per un wAP ac RBwAPG-5HacT2HnD (https://routerboard.com/RBwAPG-5HacT2HnD) per fare da access point in bridge, con ip statico sulla lan e nessun firewall. Ovviamente e` opportuno cambiare l' ip statico e il gateway, nonche` gli ssid e le chiavi di rete.
# # Prima, eseguire un system reset-configuration no-defaults=yes # poi collegarsi con il winbox (non ha ip) e caricare da console questa: # # mar/16/2017 15:28:46 by RouterOS 6.39rc55 # software id = HHUS-U4N3 # /interface bridge add fast-forward=no name=bridge1 /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce country=italy disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=test wireless-protocol=802.11 wps-mode=disabled set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=italy disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=test wireless-protocol=802.11 wps-mode=disabled /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=testicolo wpa2-pre-shared-key=testicolo /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan2 add bridge=bridge1 interface=wlan1 /ip address add address=10.1.42.199/24 interface=ether1 network=10.1.42.0 /ip dns set servers=8.8.8.8 /ip route add distance=1 gateway=10.1.42.1 /system clock set time-zone-name=Europe/Rome /system identity set name=AccessPointTest /system ntp client set enabled=yes server-dns-names=pool.ntp.org