Configurazione per i Linksys PAP2
Il PAP2 e` un ATA con due porte FXS e una ethernet.
Impostazioni sul PAP2
Queste informazioni sono preliminari.
- Connect an analog phone to the line "phone1"
- Enter **** on the keyboard (4 stars)
- Key in the sequence 101#1#1 to turn DHCP client on
- Key in 110# to have the unit say its IP address
- Open your browser and go tho the said IP address. As a default there is no password to access the unit.
- Select "Admin login" and set "Advanced view"
- Go to "Line 1"
- Set the following parameters:
Line enable: yes Proxy: <indirizzo IP del centralino> Subscriber: Display name e User Id: <userid a scelta> Password: <password> Use Auth ID: no Preferred codec: G711a
- Set it the same way for line 2, using a different account. Note that the SIP ports will be different; that's okay.
Modify Regional -> Hook Flash timer min: .05 (needed for European phones so that the flash hook works)
Modify Regional -> Interdigit Long Timer: 5 (seconds before the unit starts dialing after the last entered digit)
- Reboot your unit.
Notice that the line LEDs will stay ON when the line is registered and be flashing while the line is in use.
Configurazione di Asterisk in sip.conf
Anche questa e` preliminare. Chiaramente siccome il Linksys ha due porte, ci vorranno DUE configurazioni, una per porta.
[Linksys1] type=friend secret=<password> username=<username> callerid="My Linksys PAP2" <numero> host=dynamic canreinvite=no disallow=all allow=alaw allow=ulaw context=<il mio context> dtmfmode=rfc2833 outgoinglimit=1