⇤ ← Revision 1 as of 2005-10-19 12:02:01
1672
Comment:
|
2151
|
Deletions are marked like this. | Additions are marked like this. |
Line 7: | Line 7: |
Queste informazioni sono preliminari. * Connect an analog phone to the line "phone1" * Enter **** on the keyboard (4 stars) * Key in the sequence 101#1#1 to turn DHCP client on * Key in 110# to have the unit say its IP address * Open your browser and go tho the said IP address. As a default there is no password to access the unit. * Select "Admin login" and set "Advanced view" * Go to "Line 1" * Set the following parameters: {{{ Line enable: yes Proxy: <indirizzo IP del centralino> Subscriber: Display name e User Id: <userid a scelta> Password: <password> Use Auth ID: no Preferred codec: G711a }}} * Set it the same way for line 2, using a different account. Note that the SIP ports will be different; that's okay. * Modify Regional -> Hook Flash timer min: .05 (needed for European phones so that the flash hook works) * Modify Regional -> Interdigit Long Timer: 5 (seconds before the unit starts dialing after the last entered digit) |
* Se necessario, verificare l' IP cosi`: * Connect an analog phone to the line "phone1" * Enter **** on the keyboard (4 stars) * Key in the sequence 101#1#1 to turn DHCP client on * Key in 110# to have the unit say its IP address * Open your browser and go tho the said IP address. As a default there is no password to access the unit. * Se si sa gia` l' IP (il mio PAP2 di default aveva il DHCP attivo), andare con il browser all'indirizzo IP e poi: * Select "Admin login" and set "Advanced view" * Go to "Line 1" * Set the following parameters: {{{ Line enable: yes Proxy: <indirizzo IP del centralino> Subscriber: Display name e User Id: <userid a scelta> Password: <password> Use Auth ID: no Preferred codec: G711a Silence Supp Enable: No (FORSE, e` da provare!) }}} * Set it the same way for line 2, using a different account. Note that the SIP ports will be different; that's okay. * Ora, nella sezione Regional, dopo avere selezionato l' Advanced View, occorre: * Modify Regional -> Hook Flash timer min: .05 (needed for European phones so that the flash hook works) * Modify Regional -> Interdigit Long Timer: 5 (seconds before the unit starts dialing after the last entered digit) |
Line 36: | Line 38: |
Anche questa e` preliminare. Chiaramente siccome il Linksys ha due porte, ci vorranno DUE configurazioni, una per porta. | Siccome il Linksys ha due porte, ci vorranno DUE configurazioni, una per porta. Questo e` un esempio di una. |
Line 53: | Line 55: |
Una figata galattica: con un telefono cordless Siemens, il PAP2 quando viene chiamato visualizza non solo il numero del chiamante, ma anche il testo definito nella stringa "callerid" della definizione del chiamante! |
Configurazione per i Linksys PAP2
Il PAP2 e` un ATA con due porte FXS e una ethernet.
Impostazioni sul PAP2
- Se necessario, verificare l' IP cosi`:
- Connect an analog phone to the line "phone1"
- Enter **** on the keyboard (4 stars)
- Key in the sequence 101#1#1 to turn DHCP client on
- Key in 110# to have the unit say its IP address
- Open your browser and go tho the said IP address. As a default there is no password to access the unit.
- Se si sa gia` l' IP (il mio PAP2 di default aveva il DHCP attivo), andare con il browser all'indirizzo IP e poi:
- Select "Admin login" and set "Advanced view"
- Go to "Line 1"
- Set the following parameters:
Line enable: yes Proxy: <indirizzo IP del centralino> Subscriber: Display name e User Id: <userid a scelta> Password: <password> Use Auth ID: no Preferred codec: G711a Silence Supp Enable: No (FORSE, e` da provare!)
- Set it the same way for line 2, using a different account. Note that the SIP ports will be different; that's okay.
- Ora, nella sezione Regional, dopo avere selezionato l' Advanced View, occorre:
Modify Regional -> Hook Flash timer min: .05 (needed for European phones so that the flash hook works)
Modify Regional -> Interdigit Long Timer: 5 (seconds before the unit starts dialing after the last entered digit)
- Reboot your unit.
Notice that the line LEDs will stay ON when the line is registered and be flashing while the line is in use.
Configurazione di Asterisk in sip.conf
Siccome il Linksys ha due porte, ci vorranno DUE configurazioni, una per porta. Questo e` un esempio di una.
[Linksys1] type=friend secret=<password> username=<username> callerid="My Linksys PAP2" <numero> host=dynamic canreinvite=no disallow=all allow=alaw allow=ulaw context=<il mio context> dtmfmode=rfc2833 outgoinglimit=1
Una figata galattica: con un telefono cordless Siemens, il PAP2 quando viene chiamato visualizza non solo il numero del chiamante, ma anche il testo definito nella stringa "callerid" della definizione del chiamante!